National Convention and Exhibition Center (Shanghai)

The National Convention and Exhibition Center (Shanghai) has a total construction area of 1.47 million square meters, with an indoor exhibition hall of 400000 square meters and an outdoor exhibition hall of 100000 square meters, supporting 150000 square meters of commercial center, 180000 square meters of office facilities and 70000 square meters of five-star hotels [1]. Completed on January 19, 2015. As the largest convention and Exhibition complex in the world, the National Convention and Exhibition Center (Shanghai) will fully rely on the location advantages and radiation ability of Shanghai, base itself on the Yangtze River Delta, serve the whole China and face the world, and make positive contributions to the construction of Shanghai International Convention and Exhibition Center, the construction of Shanghai International Trade Center and the development of China's exhibition industry.

National Convention and Exhibition Center (Shanghai)

National Exhibition and Convention Center (Shanghai) is located in Shanghai, China. It is an exhibition complex integrating exhibition, conference, office and business services. It is also one of the landmark buildings in Shanghai.

The National Convention and Exhibition Center (Shanghai) started construction on December 26, 2011;

Completed on September 28, 2014;

It was fully operational on December 1, 2016.

The National Convention and Exhibition Center (Shanghai) has a total construction area of 1.47 million square meters, a ground construction area of 1.27 million square meters, and a total investment of 15.239 billion yuan.

On January 6, 2020, it will be selected as the top ten new landmark buildings in Shanghai in 2019.

Construction process

On January 9, 2011, the signing ceremony of the cooperation framework agreement for the co construction of National Convention and exhibition projects was held in Shanghai, and the relevant departments signed the letter of intent for the co construction of National Convention and exhibition projects; on December 26, the construction of China Expo Convention and Exhibition complex started, and a grand opening ceremony was held in Shanghai Hongqiao Business District.

On June 1, 2012, the preparatory work for the construction of the exhibition complex of China Expo was carried out, and the construction personnel entered the site; on July 28, the pile foundation construction of the main project of the exhibition complex of China Expo was carried out.

On October 26, 2013, China Expo exhibition complex carried out the hoisting project of roof steel truss in C1 area of the second bid section of national exhibition project.

On January 9, 2014, China Expo Convention and Exhibition complex completed the structural capping work of hall a and Hall B; on May 5, China Expo Convention and Exhibition complex was officially named National Convention and Exhibition Center (Shanghai); on June 30, National Convention and Exhibition Center (Shanghai) completed the structural capping work of single building, and the construction of hall a and Hall B was completed; on September 28, National Convention and Exhibition Center (Shanghai) was completed Workers;

On October 19, the National Convention and Exhibition Center (Shanghai) was put into trial operation.

On October 29, 2015, the construction of the second floor walking corridor of the National Convention and Exhibition Center (Shanghai) was started, and the first steel box girder was hoisted.

On January 11, 2016, the National Convention and Exhibition Center (Shanghai) completed the hoisting work of the last steel truss of the second floor walking corridor, and the walking corridor was connected;

On September 6, InterContinental Shanghai, the National Convention and Exhibition Center, opened and held an opening ceremony; on December 1, the commercial plaza of the National Convention and Exhibition Center opened and all formats of the National Convention and Exhibition Center (Shanghai) were fully operational.

In March 2018, the National Convention and Exhibition Center (Shanghai) carried out the East extension project of the second floor promenade; on July 14, the National Convention and Exhibition Center (Shanghai) completed the main structure connection of the East extension project of the second floor promenade.

On April 28, 2019, the National Convention and Exhibition Center (Shanghai) will carry out the upgrading project of exhibition scale;

On June 25, the National Convention and Exhibition Center (Shanghai) completed the pile foundation construction of the exhibition scale promotion project;

On June 26, the National Convention and Exhibition Center (Shanghai) carried out the steel structure lifting work of the exhibition scale upgrading project; on August 15, the National Convention and Exhibition Center (Shanghai) completed the main structure construction of hall 1 of the exhibition scale upgrading project;

On October 10, hall 1 and hall 2 of the National Convention and Exhibition Center (Shanghai) were put into use.

Building location

Regional location

The National Convention and Exhibition Center (Shanghai) is located in Shanghai, China. It is located in the west of the core area of Shanghai Hongqiao Business District. It extends to the red line in the south of Songze viaduct road in the north, Yinggang East Road in the south, Zhuguang road in the West and Laigang Road in the East.

Route

The routes passing through the National Convention and Exhibition Center (Shanghai) are: Songze Avenue (North), Laigang Road (East), Yinggang East Road (South) and Zhuguang Road (West); the rail transit routes passing through the venue are: Shanghai metro line 17 and Shanghai Metro Line 2, named Zhuguang Road Station and Xujing east station.

Architectural design

Design concept

The National Convention and Exhibition Center (Shanghai) adopts the beautiful and auspicious "four leaf grass" prototype, takes the central square as the flower center, and stretches out four distinct leaf like main bodies in four directions, forming a more iconic and visual impact of the centralized composition, creating a new exhibition mode of high efficiency operation, fully reflecting the functionality, symbolism, economy and technology The design principle and modeling concept of sex.

 

Architectural configuration

The National Convention and Exhibition Center (Shanghai) integrates four groups of exhibition units with the symmetrical pattern of lucky clover in nature, inlaying 16 different types of exhibition deck under four "leaves", which is the perfect unity of the form and function of the avenue.

The main entrance is covered by a triangular canopy at the entrance of the site, and the clover leaf unit is arranged at the lower part of the canopy to form a space sequence with upgrading vitality.

The three-dimensional "meter" shaped road extends to each functional space like a vein of leaves. Visitors enter the exhibition halls and meeting places on both sides of the axis through the indoor square, and the vein of leaves becomes the link of the whole space sequence.

In the center of the architectural form, the skew reticulated steel structure becomes the internal origin of the architectural form, where the "four leaf grass core" converges and carries on the final deduction, forming the climax of the whole architectural space sequence.

 

Facade design

The external form of the building of the National Convention and Exhibition Center (Shanghai) forms an atmospheric urban interface through the curved curtain wall. On the most exterior layer, through 240 columns, the roof alternates with the facade, implying "growing grass stem"; and the silver and white Yaguang gold texture of the columns is a soft and elegant architectural charm.

 

Design parameters

The National Convention and Exhibition Center (Shanghai) has a total construction area of 1.47 million square meters. Among them, the above ground area is 1.27 million square meters. There are three multi-functional venues of nearly 10000 square meters, 10000 square meters Central Plaza, 100000 square meters outdoor exhibition hall, etc., which are rich in changing space and venues. There are 42 small meeting rooms of 90-400 square meters, and 8 medium-sized meeting rooms of 400-600 square meters.

 

Structural layout

Exhibition venues

The exhibition hall area is the core gravity space of the whole building, occupying four "leaf" spaces. No. 1 to No. 3 pavilions of the National Convention and Exhibition Center are single-layer exhibition halls without columns, and No. 4 to No. 8 pavilions are double-layer exhibition halls.

 

Commercial Plaza

The commercial square of the National Convention and Exhibition Center (Shanghai) is located in the center of the "four leaf grass" building. It is composed of a circular building surrounding the central square and eight diamond buildings surrounding the circular building. The central circular building and the diamond building are connected on the first to third floors. Visitors can shuttle between the major exhibition halls and the commercial square.

 

Office buildings

The office building of the National Convention and Exhibition Center (Shanghai) is located at the end of the "four leaf grass". It is a 5A grade A office building, which connects the major exhibition halls and commercial squares with convenient footpaths. The office building is equipped with a business center, in which the one-stop administrative service window of block B office building integrates industry and commerce, taxation, tourism, etc. There are coffee shop, convenience store, staff canteen, bank and other facilities in the building.

 

InterContinental

Intercontinental National Convention and Exhibition Center (Shanghai) hotel is located in the southwest end of "four leaf grass", which is the outer edge of the leaves. It is connected with the exhibition hall through an 8-meter pedestrian corridor. The hotel is equipped with a variety of conference venues, mainly guest rooms, suites, restaurants and bars. It also has a banquet venue, a grand banquet hall, and a multi-function hall with different areas, which can meet the needs of office, conference, media center, etc What kind of demand.

 

Ancillary facilities

infrastructure

Equipment energy supply

The National Convention and Exhibition Center (Shanghai) adopts the intensive energy supply mode of Distributed Energy Center (three combined supply) and adopts the method of "distributed energy contract energy management" for construction and operation, which saves the installation of boilers and cooling towers in the main building and reduces the energy consumption

Chinese PinYin : Guo Jia Hui Zhan Zhong Xin Shang Hai