Nanning International Convention and Exhibition Center covers an area of 850 mu. It is the permanent site of China ASEAN Expo. It is designed jointly by German GMP design company and Guangxi Institute of architectural design and research. The design of the main building is unique and ingenious. It is built according to the situation of the mountain, showing great momentum.
When the ASEAN Expo is held here in October every year, friends from all over the world are welcome, most of which are from Southeast Asia. At the exhibition, you can eat authentic Southeast Asian food, enjoy exotic performances in Southeast Asia, make friends with Southeast Asian friends, and buy special Southeast Asian goods. Other times will not be held from time to time all kinds of exhibitions.
Most importantly, the architectural appearance of the exhibition center like "Bauhinia" has become one of the classic landmarks of Nanning. It emits hazy warm yellow at night, which is especially suitable for photography.
Nanning International Exhibition Center
Nanning International Exhibition Center is located in the center of Qingxiu District, the capital of Guangxi Zhuang Autonomous Region. It covers an area of 615 mu, with a building area of 640000 square meters and an indoor exhibition area of 92000 square meters. It can build 5529 international standard booths.
There are two large multi-function halls (namely golden osmanthus hall and hibiscus Hall), 18 exhibition halls of different specifications, 18 conference halls (rooms) of different specifications and news centers. After the upgrading project of Nanning International Convention and Exhibition Center was completed in 2018, the exhibition area, supporting functions, service facilities, vehicle parking, intelligent construction and other infrastructure have been comprehensively improved, forming the current scale
.
brief introduction
Nanning International Convention and Exhibition Center covers an area of 560 mu
It is the permanent site of China ASEAN Expo, which is designed by German GMP design company and Guangxi Institute of architectural design. The design of the main building is unique and ingenious. It is built according to the situation of the mountain, showing great momentum.
overview
Nanning International Convention and Exhibition Center is composed of a district (East Wing) certification hall and commercial center, B District (East Wing) osmanthus hall, news center and exhibition hall, C District (side wing) administrative complex building, D District (front wing) exhibition hall and Conference Center, e district (middle wing) exhibition hall, F and G district (tail wing) office building, hotel service and commercial supporting facilities and front square. There are two large multi-function halls (namely golden osmanthus hall and hibiscus Hall), 18 exhibition halls of different specifications (the largest is 15800 square meters, and the smallest is 2160 square meters), 18 conference halls (rooms) and news centers of different specifications. The indoor exhibition area is 92000 square meters, and 5529 International standard booths can be built.
The exhibition hall of the Convention and Exhibition Center is located in the north of Minzu Avenue, which is the main road of the city. It is adjacent to the ASEAN Business District in the East, the City Express Ring Road in the west, and overlooks the large city hydrophilic Park folk song lake. With its back on Qingxiu mountain scenic spot, it takes 15 minutes to drive to Nanning east railway station (high speed railway station) and 40 minutes to drive to the airport. There are more than 30 bus stops around the exhibition hall. Metro Line 1 has the same name station in the exhibition center, and the subway station can be reached directly from the exhibition hall business center.
Main building
The main building of Nanning International Convention and Exhibition Center is light, beautiful and transparent. It is located in the middle of the base. The multi-function hall is directly in front of the main building, and the south side is a relatively independent exhibition center. The two-story reinforced concrete columns on the natural masonry base support the unique roof, and the orderly columns give the whole building a strong sense of rhythm. The platform decorated with natural stone forms the visual base of the building, and the outdoor platform on the platform provides outdoor activity space for the exhibitors and can be used as an open-air exhibition hall. A group of new structure, unique shape of the roof flying frame in the central hall and each exhibition hall, they run through the entire exhibition center, fully express the architectural characteristics of the exhibition center. The multi-function hall is located on the hill with the elevation of 108 m (building elevation + 9.00 m) at the head end of the main building. Its folded plate dome is the "finishing touch" of the whole exhibition center complex, supported by light steel truss and covered with translucent double-layer membrane with thermal insulation layer. The soft natural light entering the Domed hall through the film creates a unique space atmosphere. Its "back" opens a pair of "back wings", echoing "Hibiscus"
.
The conference center is located under the multi-function hall (building elevation: 0.00 M / altitude: 99 m), with 5 conference halls and restaurants for flexible separation. The Convention Center has a separate entrance, so it can be used separately from the exhibition center. In the mezzanine whose elevation is between the entrance floor of the exhibition center and the entrance floor of the conference center, there is an auxiliary room serving the conference function.
The exhibition halls of the exhibition center are distributed on two floors. The spacious staircase and several escalators in the central hall connect the two floors. The elevation of the entrance floor of the exhibition center is + 9.00 M / 108 m above sea level, and the elevation of the upper exhibition hall is + 22.5 M / 121.5 m above sea level. The exhibition halls are arranged on both sides of the two-story central hall. The exhibition halls on the same floor can be combined into different units according to the needs. At most, all the exhibition halls on the same floor and the central hall can be connected as a unit, or they can be divided into left and right halves along the main axis. The southernmost exhibition hall on the lower floor is a large horizontal exhibition hall with an area of 5040 m2, which can meet the requirements of large exhibition area. The clear height of the lower exhibition hall is 10 m, and that of the upper exhibition hall is 10-15 M. All exhibition halls can light from two sides, and the sunlight input can be adjusted by shading equipment when necessary. The central hall is daylighting through the roof and the lower floors of the facades on both sides, which mainly plays the role of transportation hub of the exhibition center. When necessary, part of the area can also be used as a temporary exhibition hall.
Freight vehicles can drive directly into the interior of the exhibition hall. The supply traffic of the lower exhibition hall can reach the exhibition hall directly through the freight tunnel connecting the supply areas on the East and west sides. On the one hand, this design ensures the supply and operation of the exhibition center, and on the other hand, it avoids damaging the building image by building large-scale ramp facilities in front of the building. On the upper floor, the freight vehicles can drive in from the south side of the exhibition center and enter the exhibition hall through the corridor set in front of the exhibition hall. During the construction of the exhibition stand, freight vehicles can pass through the exhibition hall and through the central hall from the South secondary entrance.
Conference Center
The landmark dome of Nanning International Convention and Exhibition Center is equipped with sound reinforcement system and 10 + 1 simultaneous interpretation system. It is an ideal place for holding large-scale international conferences, exhibitions, banquets and performing arts activities.
Gather celebrities from all walks of life to witness top-level business activities, reflect the elegance of business elites, and show the superiority and ease of political celebrities. Experience relaxed and comfortable business communication and grasp the return on investment within reach. The conference center with luxurious decoration and comfortable environment is mainly composed of multi-function hall, stepped international lecture hall, VIP reception room and Conference (Hall) rooms of different sizes, with a total use area of more than 6000 square meters. It is equipped with high-tech modern equipment such as sound amplification system, simultaneous interpretation system, video conference system, etc., which is used for administrative or business meetings, negotiations and training It's the ideal choice. Multi function hall: as the landmark dome of Nanning International Convention and Exhibition Center, it is made up of 12 petals in the shape of Hibiscus, representing 12 nationalities living in Guangxi. The multi-function hall under the big dome is magnificent and unique in shape, with an area of 2800 square meters and can accommodate more than 1500 people. Equipped with sound reinforcement system and 10 + 1 simultaneous interpretation system, it is an ideal place for holding large-scale international conferences, exhibitions, banquets and performing arts activities.
101 International Conference Hall: the staircase international conference hall adopts the fan-shaped sunken staircase design, with a very broad vision. It has a usable area of 590 square meters and can accommodate 447 people. Equipped with a fully functional sound reinforcement system, 7 + 1 simultaneous interpretation system.
102 round table conference hall: it is a conference hall representing equal exchange and open round table. The sound reinforcement system speaker is specially designed for the project, which is concentrated on the top of the round table. The sound direction positioning effect is good, and the sound effect is excellent.
103, 105 conference hall: the conference hall used for academic lectures is elegant, comfortable and quiet. It has advanced lighting and sound facilities, and can accommodate more than 170 people. It is suitable for holding various news releases, signing ceremonies, conferences, lectures, training and other activities.
106 conference hall: solid wood tables and chairs, elegant decoration, sound reinforcement system with complete functions, which can accommodate 150 people, suitable for holding various news release, signing ceremony, conference, lecture, training and other activities.
VIP room: luxurious and comfortable decoration, elegant environment, can accommodate more than 50 people, is an ideal place for business meetings, VIP rest.
Architectural highlights
Exhibition Plaza
It covers an area of about 140000 square meters. There are intersections in the East, West and north to facilitate access to the exhibition center. Functions: walking, sightseeing, parking, assembly, etc.
The design of Nanning International Convention and Exhibition Center is ingenious. It makes full use of the terrain and landform. The main building is high on the hillside, and the exhibition square in front is the only way to enter the main building. There are six intersections around the exhibition square, including one Zhuxi Avenue and one national Avenue
Chinese PinYin : Nan Ning Guo Ji Hui Zhan Zhong Xin
Nanning International Exhibition Center
Yunnan Xinhua Bai nationality Tourist Village. Yun Nan Xin Hua Bai Zu Lv You Cun
Jiangnan Tianchi Ski Resort. Jiang Nan Tian Chi Hua Xue Chang
Nine rivers and eighteen pools. Jiu Shui Shi Ba Tan